Introduction of Qingdao Fengfeng source water supply equipme

Release time：2018-10-22 13:49

Qingdao Ke Feng Yuan Plastic Machinery Co., Ltd.
Water supply pipe, a green, energy-saving, environmental protection pipe, no rust, no scaling, no shrinkage, fluid resistance is small, can effectively reduce energy consumption, improve water supply point, is an ideal pipe network. The water supply pipes are divided into metal pipes, composite pipes and plastic pipes. Metal pipes are mainly divided into copper pipes and stainless steel pipes. Metal pipes are safe, hygienic, durable and many other characteristics. They are the most ideal pipes for home fittings.

The difference between water supply pipe and drain pipe is:
1, pressure: there are pressure requirements for water pipes and drainpipes, so it is not entirely possible to use pressure to distinguish them. (reflected on top risers)
2. Pipe Material: As one netizen said, for small pipes, pipes may be PPR, but large pipes, especially municipal pipes have different requirements. As long as it is embodied, the sanitary conditions of the drainage pipe can be reduced appropriately, and the drainage pipe has silent structure (the drainage pipe is mostly non-full pipe flow).
3. Pipe Diameter: The minimum drainage pipe is generally DN50, the minimum water supply pipe is DN15, the general municipal pipe, drainage pipe is much larger than water supply pipe.

   Water supply pipe equipment is so widely used around us, mainly because of the market demand for water supply pipe, the equipment is mainly used to produce agricultural water supply and drainage, building water supply and drainage, cable laying and other aspects of a variety of pipe diameter, wall thickness of plastic pipes. The equipment is composed of conical twin screw extruder, vacuum setting table, tractor, cutting machine and so on. Stable performance, high production efficiency, is a good helper in people's lives, including screw extruder and tractor, are all imported AC frequency conversion speed regulation equipment, so can achieve stepless speed regulation, and vacuum pump and traction motor are also used in the market better products, including tractor two claws, three claws, four. Various traction methods such as claw are available. The performance of the water pipe equipment is good and the production efficiency is very high.

Mail combination and component function of water supply pipe equipment, including 7 systems, such as water skimming, water storage conditioning, water conveyance, automatic power control, pressure surprise, water level adjustment and gas conditioning control.
All departments of the system are influenced by the following factors: controlling all the water-tight system by air pressure, transferring orders from the electric lime system to the factory, starting and ending the operation of the pump; drawing water from the water source system by the pump, and then pressured to the pneumatic water tank; water storage, conditioning, and pressure feeding by the pneumatic water tank to achieve the water table service. Application of pneumatic water supply pipe equipment When water is delivered to the water supply pipe network, excess water enters pneumatic water grinding, the water chamber expands and compresses the gas in the aiming chamber, the pressure in the air chamber decreases as well. When the pressure rises to the highest event pressure P2, the pump stops and the pressure in the tank compressed gas will be applied to aim at it. The stored water is fed into the water supply network, the water chamber decreases, the air chamber expands, and the caries pressure decreases accordingly. When the pressure reaches the lowest working pressure P, the pump starts again and starts again.